I'm getting the following error on this shortcut attribute. I have others within other Objects that do not have any problem? Please advise.
Internal error. Problem in StableOutfallProject.ProjectName for shortcut attribute StableOutfallProjectName Path StableOutfallProject.ProjectName contains lists
Internal Error Problem with Shortcut Attribute
-
- Posts: 62
- Joined: Mon Jan 02, 2006 3:20 pm
- Location: Fort Worth Texas
-
- Posts: 595
- Joined: Sun Apr 24, 2005 2:22 am
- Contact:
Most probably the problem is caused by the 'Multiple allowed' option set to Yes for attribute StableOutfallProject. The system does not allow this in shortcuts because if there are multiple related object instances it would have no way of knowing which of the instances the shortcut should point to.
Go to the property dialog for attribute StableOutfallProject, un-check the 'Multiple allowed' box and save the attribute and the object. Then re-create the shortcut attribute. The problem should go away.
Let me know if it does not work.
Go to the property dialog for attribute StableOutfallProject, un-check the 'Multiple allowed' box and save the attribute and the object. Then re-create the shortcut attribute. The problem should go away.
Let me know if it does not work.
Aware IM Support Team
-
- Posts: 62
- Joined: Mon Jan 02, 2006 3:20 pm
- Location: Fort Worth Texas
I did not have the multiple option choosen. I did...
I did go ahead and delete the short cut and re-created the shortcut but the problem continues
This is the lastest error message.
Internal error. Problem in StableOutfallProject.ProjectName for shortcut attribute StableOutfallProjectName Path StableOutfallProject.ProjectName contains lists
This is the lastest error message.
Internal error. Problem in StableOutfallProject.ProjectName for shortcut attribute StableOutfallProjectName Path StableOutfallProject.ProjectName contains lists
-
- Posts: 595
- Joined: Sun Apr 24, 2005 2:22 am
- Contact:
-
- Posts: 62
- Joined: Mon Jan 02, 2006 3:20 pm
- Location: Fort Worth Texas
The box was un-checked and with some research I found that the failure was in the query. I've deleted the query and all reference to the attributes. I'm going try to recreate them and see if this will clear up the problem.
The version had been published already because the problem was not caught in test mode. The failure only appeared if we ran the query.
I'll keep you posted.
The version had been published already because the problem was not caught in test mode. The failure only appeared if we ran the query.
I'll keep you posted.